Detection Equipment
Dual Beam PIR
Reliable External Detection of Intruders
Dual Beam Technology to Minimise nuisance alarms
Rugged metal enclosure
Typical Detection Range 30 Metres
Radio Range, up to 500 Metres
Battery life typically 2 years
Wide Angle PIR
A PIR designed for general internal use providing 12 metre 90° detection coverage. The product has an integral transmitter and antenna providing radio range of up to 100 metres. For use with all FM alarm controllers and interfaces, the unit is available in two versions – one designed to comply with PD6662:2004 Grade 2 and the other with PD6662:2004 Grade 1.
Pet Tolerant PIR
A PIR that is designed for internal use where a domestic animal of 25 kg or less is housed. The product has an integral transmitter and antenna. Designed for use with all FM alarm controllers and interfaces, the unit is available in two versions – one designed to comply with PD6662:2004 Grade 2 and the other with PD6662:2004 Grade 1.
External PIR
A waterproof wire-free PIR designed for external use. The product is designed to comply with PD6662:2004 Grade 1, and has a maximum radio range of 500 metres. Available with three detection patterns to suit different operating conditions: 12 metre 90°, 10 metre horizontal curtain and 25 metre corridor.
General Purpose Transmitter
This wire-free, battery powered transmitter is designed to provide flexibility for alarm installers, allowing them to incorporate normally open/closed or clean relay devices from wired system suppliers into any FM alarm controller or interface. Maximum radio range is 500 metres; and the unit is designed to comply with PD6662:2004 Grade 1.
Contact Transmitter
General purpose contact and exit terminate transmitter. Designed for perimeter protection. Screw terminals provided for external closed alarm contacts, tamper loop and normally open push to set. Suitable for use in systems designed to comply with PD6662:2004 Grade 1 or BS6799 Class 3 specifications.
Inertia Transmitter
This device, designed for use within any building, will signal to all FM alarm control units and interfaces when activated. Designed with a built in transmitter and containing a vibration analyser and adjustable sensitivity control, units are designed to comply with either PD6662:2004 Grade 2 or PD6662:2004 Grade 1 depending on model supplied.
Smoke detector
This wire-free detector identifies the presence of smoke using optical techniques. Upon activation the unit will signal to any FM alarm control unit or interface providing an audible indication both on the activated detector and at the alarm control unit. Designed to comply with PD6662:2004 Grade 2 or PD6662:2004 Grade 1 depending on model supplied.
Heat detector
This wire-free detector with integral transmitter senses rapid rises in temperature. Upon activation the unit will signal to any FM alarm control unit or interface providing an audible indication both on the activated detector and at the alarm control unit. Designed to comply with PD6662:2004 Grade 2 or PD6662:2004 Grade 1 depending on model chosen.
